Single Stage Double Suction Water Pump

Basic Info

Model No.: ZSS350

Impeller Number: Single-Stage Pump

Working Pressure: Middle Pressure Pump

Influent Type of Impeller: Single Suction Pump

Position of Pump Shaft: Horizontal Pump

Pump Casing Combined: Horizontal Split Pumps

Mounting Height: Suction Centrifugal

Impeller: Open

Usage: Pump

Additional Info

Packaging: Wooden case or Frame steel Case

Productivity: 1100000 sets/year

Brand: GAOFENG

Transportation: Ocean,Land,Air

Place of Origin: Zigong,Sichuan,China

Supply Ability: 110000 sets/month

Certificate: ISO9001

HS Code: 8413709990

Port: Shanghai,Guangxi,Chengdu

Product Description

1. Conform to ISO2858(GB5662)and GB/T5656(equivalent to ISO5199)
2. Heavy shaft of increased diameter, the bearing capacity of bearings is averagely increased by 75~160%, the life of bearings are tremendously extended.
3. Forced internal cooling cartridge mechanical seal and big sealing chamber reduced the possibility of breakdown.
4. Easy adjust method of pump rotor part to maintain low pressure of sealing chamber, to reduce the axial force,and therefore guaranteed the stable operation of pump.
5. Several transforming designs enlarged the range of application of pump, increased the reliability of pumping special fluids.
6. High interchangeability of pump parts reduced the cost on spares  parts for clients.

1. Single stage,single suction,horizontal centrifugal pump. Bracket structure for bearing parts, the bearing housing is supported by the bracket. The axial displacement of pump rotor part can be adjusted by a special bolt. Closed impeller(ZBG type),semi-open impeller(ZBK type) and fully opened impeller(ZBQ type) are available.
2. The impeller is connected with shaft by screw thread, an anti-vortex plate is adopted at the pump inlet to increase the reliability of pump.
3. The impeller with rear blades is adopted to balance the axial force at the pump suction. And the gap between the rear blades of impeller and pump cover can be adjusted by a bolt.
4. The pump structure is back pull type,the rotor part(impeller,shaft,shaft sealing and bearings) can be removed without dismantling the pipes during maintenance.
5. The shaft sealing is cartridge mechanical seal, and can be customized as single mechanical seal, packing sealing and secondary impeller+packing sealing.

a. Chemical,dye,petroleum,pharmacy,brewage,electroplating,dyeing,environment protection, power plant, mine, oil tanker, etc;
b. Chemical medium with acid or alkali, slurry.Viscosity≤100centipoise,Solid content≤30%.
c. The building, fire control, and farm's water feeding.